Tag Archives: Extrication

More American Iron and Steel Institute Links

Links fixed on the American Iron and Steel Institute post. Also added some more links below from the American Iron and Steel Institute. Chapters 2 and 3 discuss body structures and vehicle designs. So make sure you at least skim ...

Read More »

American Iron and Steel Institute

The steel makers are responsible for all the new challenges firefighter face with vehicle extrications. However, groups like the American Iron and Steel Institute have made information available that we should all take the time to read. Technical Information Application ...

Read More »

VW Beetle Safety Cage Body Structure

Unfortunately, founding information on the type of steel used and the location of any UHSS or Boron was unsuccessful. I’ll put a request in with VW for some clarification. In the mean time, take a look at the VW Beetle ...

Read More »

Buick Enclave B-pillar made from DP 980

The reinforcement of this B-pillar from a Buick Enclave is made from DP 980, which is UHSS but it is spot-welded to an HSLA reinforcement. The reinforcement for the B-pillar of a Buick Enclave is made from DP 980, an ...

Read More »

Subaru, UHSS, and Boron

After several request for information on the Boron and Ultra-high Strength Steel (UHSS) used in Subaru vehicles I decided to put together a post. Subaru is well known for the use of Boron and UHSS so I steered cleared of ...

Read More »

List of Vehicles with Boron and UHSS

I started a List of Vehicles with Boron and UHSS broken down by vehicle division brand news like Chevrolet and Honda. The list will continue to grow today. Please let me know what you think!

Read More »

2010 Ram 1500 UHSS

The Highway Safety Rating (IIHS) for Overall Side is listed as Marginal for the 2009-2010 Dodge Ram. The truck has Side Guard Door Beams in the front and rear doors. This information would led me to think there should not ...

Read More »

2011 Ford Super Duty and Boron?

Remember all the boron and UHSS used in the 2009 F-150? Laser welding is used to mate the roof and body-side panels to the truck’s new roof structure. The roof structure is made from DP-780 super high-strength. The high-strength steel ...

Read More »